CO2激光器线偏振光输出腔内起偏器的研究

混合InGaAs光电二极管阵列ETX128FPA是16384元InGaAs焦平面阵列,供1.0～1.7μm波段内的近红外成象使用。这种128×128元的二维光电二极管阵列是使用钢冲击结合技术把InGaAs材料结合到高级的CMOS倍增管上而制成的。     

光电摆角动态测量原理及其测量系统

本文阐述了用于测量物体摆角及摆心浮动量的光电动态实时测量原理,以及根据此原理研制的光电导弹喷管摆角动态测量系统。     

上瓦开周向槽椭圆轴承动态特性分析

本文推导了计及惯性的Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程的简化形式，分析了考虑开槽区流体周向惯性的上瓦开周向槽椭圆轴承的动态特性。     

底排弹测试现状及展望

本文在对底排弹测试技术现状调查和分析的基础上,概括出了底排弹测试的两个基本层次,总结了底排弹测试的各种方法,指出了各种测试方法的优缺点。针对现行测试方法在动态领域的不足,探讨性地提出了动态存储测试方法。     

Some kinetic aspects of unsteady-state partial oxidation reactions. Dynamic processes on metal oxide surfaces

It is shown that steady-state kinetic data do not allow the discrimination between the redox and associated mechanisms of the partial oxidation reactions. A discrimination between these mechanisms was performed using transient experiments. The obtained rate expressions are in agreement with experimental kinetic data for catalytic partial oxidation of o-xylene.

An influence of the conjugate oxidation of a catalyst surface on dynamics and kinetics of the heterogeneous catalytic oxidative reactions is considered. Computing simulation of methane oxidative coupling of methane reaction at lowered temperature and elevated pressure has been performed. It showed that the reaction order with respect to oxygen exceeding unity is consistent with the chain branching mechanism of the reaction in the presence of TiSi₂ and TiB₂ and showed the important role of the branching chain cycles in the low-temperature OCM reaction at elevated pressure.     

被动锁模复合环形腔掺饵光纤激光器的自启动分析

本文对被动锁模复合环形腔掺饵光纤激光器的自启动工作特性进行了分析，指出谐振腔内残余反射面的存在是阻碍激光器实现自启动锁模的主要原因。利用半导体激光器有源区的折射率随注入电流的变化而改变的特性，在谐振腔中获得了一个可移动腔镜，克服了腔内残余反射面的影响，实现了锁模的自启动。     

动态全息图快速引入背景条纹技术

音叉振动镜快速引入背景条纹的动态全息图两次曝光法，适用于一次泵浦的双脉冲全息干涉计量术．其背景条纹的密度和方向具有可调性和重复性．     

自调Q掺饵光纤激光器

研制出一种结构新颖的掺饵光纤激光器，该激光器利用线性光纤环形镜和半导体激光器芯片的背向反射镜组成谐振腔。采用半导体激光器芯片作为饱和吸收体，在９ｍＷ的泵浦功率下，该激光器实现了自调Ｑ脉冲输出。输出光脉冲宽度为１２μｓ，脉冲峰值功率约为２２ｍＷ，脉冲序列的重复周期约为６５μｓ。     

外加剂混凝土动态与静态坍落度损失的流变特性

本文对动、静态下混凝土坍落度损失的规律进行了研究,并从流变学的角度分析了外加剂对动、静态下混凝土坍落度损失的影响坍落度损失存在差别的原因.     

Simulation of toxic gases and vapours removal by activated carbon filters

The system ASC carbon filter/cyanogen chloride was studied by simulation. Three filter configurations and several models, taking into account Langmuir adsorption and second-order reaction between the adsorbed toxic vapour and the active metal on the surface, were developed.The effects of axial dispersion, number of reaction units, film mass transfer units and intraparticle mass transfer resistance on the breakthrough time were studied.Simulation results show that a complex model should be used in order to predict with reasonable accuracy the protection imparted by these filters.